18507999558
Short run of the ball
Short run of the ball
Short run of the ball
General situation of

The plastic hollow float ball has the characteristics of large void fraction, heat resistance, chemical corrosion resistance, small specific gravity and so on. The use temperature in various media is 60-150 degrees, the plastic hollow floating ball can greatly reduce the heat loss, reduce the acid mist and air carbon dioxide and oxygen pollution to the water, to maintain the water quality, save energy, purify the environment. The plastic hollow float ball has the characteristics of stable center of gravity, edge and edge overlap and good covering effect. Plastic hollow floating balls are widely used in packed towers in petroleum, chemical industry, electroplating factory, environmental protection industry and other industries.

● It has the characteristics of large voidage, heat resistance, chemical corrosion resistance, low height of pressure drop and mass transfer unit, high flooding point, full gas-liquid contact, small specific gravity, high mass transfer efficiency. The use temperature of various media is 60-150 degrees Celsius, widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries of the packed tower which.

Plastic empty stable run of the ball with a center of gravity, and while overlap, covering the characteristics with good effect, can be widely used in all kinds of bedroom acid storage tank, the condensate storage tank and water treatment in addition to salt water tank, large extent reduce heat loss, decrease of acid mist and the pollution of water, oxygen and carbon dioxide in the air to protect operators health, to maintain water quality, energy conservation, environment purification effect

The product nameThe hollow ball
The materialPP PVC RPP PFA CPVC
HDPE PTFE ETFE ABS
The service life of the>3 years
sizeThe weight of theThe number ofThe number of
mmgpet ft2pet m2
100.2107611600
2012702900
251.51721850
384.574800
45753570
50843465
5510.535380
701622235
1004010116
150100555
performanceLarge voidage, low pressure, low height of mass transfer unit, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency
advantages1. Large flow, low pressure and good mechanical strength.
2. Strong corrosion resistance, large void, energy saving and environmental protection, low cost, easy to load and unload light weight.
Application fieldPlastic is widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries in the packed tower.


Properties/MaterialsPEPPRPPPVCCPVCPVDF
Density (after injection)0.980.961.21.71.81.8
Operating temperature90>100>120>60>90>150
Corrosion resistanceGOODGOODGOODGOODGOODGOOD
The compressive strength>6.0>6.0>6.0>6.0>6.0>6.0




Related to recommend

Copyright © Jiangxi Aite Mass Transfer Technology Co., Ltd.    Gan ICP is prepared 2021000504-1

Company address: the intersection of Jinguang Avenue and Chongqing Middle Road, Anyuan Industrial Park, Pingxiang City, Jiangxi Province


TELKNOWLPRO PSE
18507999558