Plastic moment saddle ring is made of polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF) tower packing. High voidage, low pressure drop, low mass transfer unit height, high flooding point, full gas-liquid contact, small specific gravity, high heat and mass transfer efficiency. The operating temperature of these plastic bulk fillers can be in 60-280 degrees Celsius. Widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries in the packed tower.
● Plastic moment saddle ring has a smooth curved side in the packed bed, increase the gap between the packing contact, make it more conducive to the flow and diffusion of gas and liquid in the packed bed, with the characteristics of pressure reduction, high mass transfer efficiency.
| The product name | Plastic torque saddle ring | |||||
| The material | PP,PE,PVC,CPVC,PVDF ,PTFE | |||||
| The service life of the | >3 years | |||||
| size | Specific surface area | Void fraction | Accumulation number | Packing weight | Dry packing factor | |
| mm | m2/m3 | % | per/ m3 | Kg/m3 | m-1 | |
| 1” | 25×12.5×1.2 | 288 | 85 | 97680 | 102 | 473 |
| 1-1/2” | 38×19×1.2 | 265 | 95 | 25200 | 63 | 405 |
| 2” | 50×25×1.5 | 250 | 96 | 9400 | 75 | 323 |
| 3” | 76×38×2 | 200 | 97 | 3700 | 60 | 289 |
| performance | Large voidage, low pressure, low height of mass transfer unit, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency | |||||
| advantages | 1. Large flow, low pressure and good mechanical strength. | |||||
| 2. Strong corrosion resistance, large void, energy saving and environmental protection, low cost, easy to load and unload light weight. | ||||||
| Application field | Plastic bulk packing temperature of 280 degrees Celsius, widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries in the packing tower. | |||||
| Properties/Materials | PE | PP | RPP | PVC | CPVC | PVDF |
| Density (after injection) | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.8 |
| Operating temperature | 90 | ＞100 | ＞120 | ＞60 | ＞90 | ＞150 |
| Corrosion resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
| The compressive strength | ＞6.0 | ＞6.0 | ＞6.0 | ＞6.0 | ＞6.0 | ＞6.0 |
Qr code
Copyright © Jiangxi Aite Mass Transfer Technology Co., Ltd. Gan ICP is prepared 2021000504-1
Company address: the intersection of Jinguang Avenue and Chongqing Middle Road, Anyuan Industrial Park, Pingxiang City, Jiangxi Province
Copyright © Jiangxi Aite Mass Transfer Technology Co., Ltd. Gan ICP is prepared 2021000504-1
Company address: the intersection of Jinguang Avenue and Chongqing Middle Road, Anyuan Industrial Park, Pingxiang City, Jiangxi Province
18507999558
