Ceramic Rasch ring fillers are commonly used in scrubbers for chemical production, which increases the specific surface area of the filter medium. So, how to choose high quality ceramic Lasi ring? When we see Ceramic Lash Ring, we can see, smell, lick and throw to distinguish the advantages and disadvantages of Ceramic Lash Ring.

One is to look, start with the color of the ceramic Rasch ring and make sure the surface of the ring is smooth and flat. The round color indicates that the color is made from kaolin. You can also check if there are many black spots on the surface of the ceramic Rasch ring, and if the black spots are small and unclear, it is an indication that the iron removal process was good. You can also check the roundness and beauty of the ceramic lasi ring, good roundness and beauty means that the production factory processing technology is relatively good.

Two are listening to the tone of ceramic lassie ring to judge. The two ceramic Rasi rings touch each other and listen quietly with your ears. If the sound is clear and cloudy, it is a high quality ceramic Lasi ring. This indicates that the ceramic Lasi ring has been completely fired during sintering. Otherwise, the quality will not be verified and will not burn. Ceramic lassie rings can affect their life because of overheating.

Three is to take out the finished ceramic ring, and then wet the surface of the ceramic ring with water. If the surface of the ceramic Rasch ring becomes wet immediately, the absorption rate is high and the ceramic Rasch ring is confirmed to be complete. If not immediately wet, it shows that the quality of the ceramic Laxi ring.

The fourth step is throwing. Take the finished ceramic Lasi ring and drop it out of the air to test its strength. The standard test is that if you drop a ceramic Lasi ring at a height of 5 m, it will not break and the shape will remain intact. This indicates that it is a high quality ceramic Rasch ring. Anything else is flawed.